6
2
7
2-40
Reserving Jobs
When it is time for the reserved print job to be printed, load
the specified paper into the stack bypass.
NOTE
•
The specified paper size/type is displayed on the screen when it is time for the
reserved print job to be printed.
•
Make sure to load the same paper size and type selected in step 3 into the stack
bypass. Printing does not start if paper of a different size or type is loaded.
Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides ➞ specify
the paper size ➞ press [OK].
If the following screen is displayed, adjust the width of the slide guides to match
the paper size stored in Stack Bypass Standard Settings, or set Stack Bypass
Standard Settings to 'Off' in Common Settings (from the Additional Functions
screen). (See Chapter 4, "Customizing Settings," in the
IMPORTANT
Set the paper size to the same size as the paper loaded in the stack bypass.
Reference Guide
.)