Reducing/Enlarging Using the Original and Copy/Record
Sizes
The Zoom Program mode enables you to reduce or enlarge originals by individually
entering the dimensions of the original and copy paper (record size).
Any copy (zoom) ratio from 25% to 400% may be used.
The following two Zoom Program modes are available.
NOTE
•
The specified sizes are converted into a copy (zoom) ratio (%) by the machine using the
formula below. The result is rounded to the closest integer.
Copy (zoom) ratio (%) = (copy (record) size/original size) x 100
To cancel this setting, press [Copy Ratio] ➞ [Zoom Program] ➞ [Cancel].
•
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the
Reference Guide.
■ Making Copies (Scanning) with the Same XY Copy/Zoom Ratio (Zoom)
You can set the same copy (zoom) ratio for both the horizontal (X) and vertical (Y) axes.
Original
X = 4" (100 mm)
LTR
Copy
X = 5 7/8" (150 mm)
LTR
Changing the Copy (Zoom) Ratio
3
3-17