Interrupting the Current Job to Make Priority
Interrupting the Current Job to Make Priority
Interrupting the Current Job to Make Priority
Interrupting the Current Job to Make Priority
Copies
Copies
Copies
Copies
(Interrupt Mode)
(Interrupt Mode)
(Interrupt Mode)
(Interrupt Mode)
The Interrupt mode enables you to interrupt the reserved or current job long enough to make higher
priority copies. This mode is useful when making a rush copy during a long copy job.
NOTE
• • • •
You can make interrupt copies when the machine is ready to scan.
1 1 1 1
Press
Press
Press
Press
When you want to copy after changing the Department ID while Department ID Management is enabled,
press
NOTE
• • • •
Even when you press
2 2 2 2
Place your original, and set the desired copy mode.
Place your original, and set the desired copy mode.
Place your original, and set the desired copy mode.
Place your original, and set the desired copy mode.
NOTE
• • • •
To cancel the Interrupt mode, press
• • • •
To cancel all settings and return the machine to the Standard mode, press
3 3 3 3
Press
Press
Press
Press
When the Interrupt copy job starts,
1-70
1-70
Interrupting the Current Job to Make Priority Copies (Interrupt Mode)
1-70
1-70
. . . .
and enter the Department ID and Password. (See the Reference Guide .)
, the job currently being output will not be interrupted until the interrupt copy starts printing.
. . . .
.
stops blinking.
.