Canon Color imageRUNNER C3480 Manual page 159

If you selected the paper to use for the main document from [Stack Bypass
Settings], select the paper size and press [Next] ➞ select the paper type and
press [OK].
If you pressed [Add Cover], Press [Next] ➞ select whether to print on the
cover.
Press [Next] ➞ select the paper source to use for the cover page ➞ press
[OK].
If you selected the paper to use for the cover from [Stack Bypass Settings],
select the paper type ➞ press [OK].
IMPORTANT
•
Make sure to use the same paper size for the cover and the main document.
•
If you select [No] for <Select whether to print on covers.>, [Heavy 1] or [Heavy 2]
can be selected.
•
Only 17 to 28 lb bond (64 to 105 g/m
•
Only the following paper can be used for the cover:
- If you are printing on the cover:
- If you are not printing on the cover: 17 lb bond to 80 lb cover (64 to 220 g/m
NOTE
•
If you are loading the paper for the cover page into a paper drawer, you must load
the paper face up.
•
If you are loading the paper for the cover page into the stack bypass, you must load
the paper face down.
3
Press (Start).
2 ) paper can be used for the main document.
17 to 28 lb bond (64 to 105 g/m
Collating Copies/Prints
3
2
)
2
)
3-43