Making Copies For Use As A Booklet (Booklet) - Canon Color imageRUNNER C3480 Manual

Making Copies for Use as a Booklet (Booklet)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Booklet Mode," on p. 4-19.
IMPORTANT
•
The 2-Sided Original mode is available only if the optional Feeder (DADF-L1) is attached
(standard equipped for the Color imageRUNNER C3480i/C3080i).
•
Saddle stitching is not performed when there is only one sheet.
•
The Saddle Stitch and Divided Booklet modes can be set only if the optional Saddle
Finisher-Y2 is attached.
•
The accuracy of folds created in the Saddle Stitch mode may vary, depending on the
paper type and the number of sheets.
•
Make sure to place originals with a vertical (portrait) orientation vertically. If these
originals are placed horizontally, the even numbered pages will be printed upside down.
•
When printing on special types of paper, such as heavy paper or transparencies, be sure
to correctly set the paper type, especially if you are using heavy paper. If the type of
paper is not set correctly, it could adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam, and a service repair may be
needed.
1
Press [Book/Page Edit/Shift] ➞ [Booklet].
2
Press [Set] ➞ specify each setting.
❑
Press [Select Original Size] ➞ set the size of the original to scan.
❑
If the original is two-sided, press [2-Sided Original] ➞ select the type of
two-sided original ➞ press [OK].
❑
Press [Paper Select] ➞ select the paper source to use for the main document
➞ press [Done].
Book/Page Edit/Shift Settings
7
7-51