Time-Of-Day Manual Override - Notifier Fire Alarm Control Panel Operating Manual

5.1.5 Time-of-Day Manual Override

Select option 4: Time-of-Day Manual Override to manually override
an active Time-of-Day program. This override function is only possible
if a program (up to ten programs are configurable) was configured at
system commissioning. If a Time-of-Day program is active the DAY
MODE LED is lit. However, if it has been overridden using this menu
option the DAY MODE LED extinguishes until the next configured
day mode period occurs or the Time-of Day program, if still active,
has been restored using this menu option.
In the example shown here only Time of -Day program 1 has been
configured. To disable this program, i.e. disable the configured change
to sensor sensitivity, press the
press the key.
Note: The overridden Time-of-Day program will return to its non-
overridden state for the beginning of the next configured day
mode period.
997-670-000-2
www.notifierknowledge.com
key. To cancel out of this function,
Navigating the Panel Menus
Operating Manual
Section 5 - 7