Table of Contents
Advertisement
5.1.3 Fault Routing Outputs
Select option 3: Fault Routing Outputs to enable/disable the fault
routing output circuit(s).
To enable/disable the fault routing output(s) press the
time the
key is pressed the enable/disable state changes (toggled).
Press the
key at any time to exit.
5.1.4 Delays to Outputs
This option is only available when delays have been configured as
part of one or more Cause & Effect rules. If any such delays are
configured the DELAYS ACTIVE LED is lit.
Select option 4: Delays to Outputs to disable/enable the delay to
alarm outputs.
To disable/enable any configured delays press the
time the
key is pressed the delay enable/disable state changes
(toggled).
Press the
key at any time to exit.
997-670-000-2
www.notifierknowledge.com
key. Each
key. Each
Navigating the Panel Menus
Operating Manual
Section 5 - 6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Fire Alarm Control Panel and is the answer not in the manual?