Precautions For Data Setting; Monitoring Mode - Hitachi SJ700B Series Instruction Manual

8.1 Precautions for Data Setting

The default display mode limits the screens (parameters) that can be displayed on the monitor. To enable the display of all parameters, specify "00" (full display) for the function code display
restriction (b037).
To enable the parameters to be changed while the inverter is operating, specify "10" for the software lock mode selection (b031).

8.2 Monitoring Mode

With the default settings, the monitor always displays the data output according to the output frequency monitoring (d001) after power-on. To change the initial display content, change the setting
of the initial-screen selection (b038) as required.
Code Function name
d001 Output frequency monitoring
d002 Output current monitoring
d003 Rotation direction minitoring
d004 Process variable (PV), PID feedback
monitoring
d005 Intelligent input terminal status
d006 Intelligent output terminal status
d007 Scaled output frequency monitoring
d008 Actual-frequency monitoring
d009 Torque command monitoring
d010 Torque bias monitoring
d012 Torque monitoring
d013 Output voltage monitoring
d014 Power monitoring
d015 Cumulative power monitoring
d016 Cumulative operation RUN time
monitoring
d017 Cumulative power-on time monitoring
d018 Heat sink temperature monitoring
d019 Motor temperature monitoring
d022 Life-check monitoring
d023 Program counter
d024 Program number monitoring
Monitored data or setting
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.0 to 999.9, 1000 to 9999 (A)
F (forward rotation), o (stopped), r (reverse rotation)
0.00 to 99.99, 100.0 to 999.9, 1000. to 9999.
1000 to 9999 (10000 to 99990), ⎡100 to ⎡999 (100000 to 999000)
FW
6 4
8 7 5 3 2 1
AL 15 14 13 12 11
0.00 to 99.99, 100.0 to 999.9, 1000. to 9999., 1000 to 3996 (10000 to 39960)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-150. to +150. (%)
-150. to +150. (%)
-150. to +150. (%)
0.0 to 600.0 (V)
0.0 to 999.9 (kW)
0.0 to 999.9, 1000. to 9999.
1000 to 9999 (10000 to 99990), ⎡100 to ⎡999 (100000 to 999000)
0. to 9999., 1000 to 9999 (10000 to 99990), ⎡100 to ⎡999 (100000 to 999000) (hr)
0. to 9999., 1000 to 9999 (10000 to 99990), ⎡100 to ⎡999 (100000 to 999000) (hr)
-020. to 200.0 (°C)
-020. to 200.0 (°C)
2 1
0 to 1024
0000 to 9999
8 - 1
Chapter 8 List of Data Settings
(Example)
Terminals FW, 7, 2, and 1: ON
Terminals 8, 6, 5, 4, and 3: OFF
(Example)
Terminals 12 and 11: ON
Terminals AL, 15, 14, and 13: OFF
1: Capacitor on main circuit board
2: Cooling-fan speed drop
ON
OFF
Setting during Change during
operation operation
Default
(allowed or not) (allowed or not)
− −
− − −
− − −
− − −
− − −
− − −
− −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
Page
4-1
4-1
4-1
4-1
4-2
4-2
4-2
4-3
4-3
4-3
4-3
4-3
4-3
4-4
4-4
4-4
4-4
4-4
4-5
4-5
4-5