Place The Originals - Kyocera TASKalfa 1800 Operation Manual

Operation on the Machine > Loading Originals
1
2
Adjust the original width guides.

Place the originals.

Put the side to be scanned (or the first side of two-sided originals) face-up. Slide the leading
edge into the document processor as far as it will go.
NOTE
• For details on original size, refer to
• For details on original orientation, refer to
5-20.
IMPORTANT
• Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.
• Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam.
• Originals with punched holes or perforated lines should be placed in such a way
that the holes or perforations will be scanned last (not first).
Original Size on page
Orig. Orientation (Original Orientation) on page
5-4
A3 A3
Original size
* When selecting the copying function
5-19.
1