Scan Destination Settings - Kyocera TASKalfa 1800 Operation Manual

System Menu and KYOCERA Client Tool > Default Settings on the PC (KYOCERA Client Tool)

Scan Destination Settings

Configure the Scan Destination settings on
IMPORTANT
To reflect settings in the machine, the [Reset] key on the operation panel of the machine needs to be pressed.
NOTE
Scan, Print Box, and device monitoring will be disabled while the [Scan] window is open.
Item
Destination number
Summary
Display name
Original size
Original image
*1
Duplex
Original orientation
Sharpen
Scan color
Density
*1 The optional document processor is required.
[Scan Destination] of the [Device] tab.
Select the destination number (1 to 10) to be registered. When a destination number is selected, the
settings registered in that number appear in the right-hand screen.
Shows a list of the settings of the selected destination.
Set a name for the destination. Up to 16 characters can be entered. This name is displayed when you
select a destination on the machine operation panel.
Specify the size of originals being scanned.
Value: Auto, A3, A4, A5, A6, B4, B5 (JIS), B6, Folio, 216 × 340 mm, Ledger, Letter, Legal,
Statement, 11 × 15", Oficio II, 8K, 16K, Hagaki, Oufuku Hagaki, Custom
NOTE
Refer to Custom Orig.Size on page 7-7
Select image quality suited to the type of original.
Value:
Text + Photo Photo
Set duplex of original.
Value:
Off Binding left/right
Select the orientation of the original document top edge to scan correct direction.
Value:
Landscape, Landscape,
Top edge left Top edge top
Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the sharpness.)
Select the color mode setting.
Value: Monochrome, Grayscale, Full color
Select the density.
Value: Lighter (-3), Lighter (-2), Lighter (-1), Normal (0), Darker (+1), Darker (+2), Darker (+3)
To automatically set the density depending on the density of originals, select the [Auto] checkbox.
(This item can be set only if [Monochrome] is set for Scan color.)
Description
for selecting [Custom].
Text
Portrait,
Top edge left
7-20
Binding top
Portrait,
Top edge top