Changing The Program Name; Deleting Program - Kyocera TASKalfa 1800 Operation Manual

Operation on the Machine > Copying
Overwriting Program
Programs can be changed with the same procedures as those for registering programs. When selecting the program
number to be registered, select the program to be changed and overwrite the program number. Refer to
Program on page 5-25.

Changing the Program Name

Use the procedure below to change the program name.
1
2

Deleting Program

Use the procedure below to delete a program.
1
Display the screen.
1
Press the [Program] key.
2
Press the [▲] or [▼] key to select a program number (01 to 04) to edit, and press the [OK]
key.
Select program
Program 01
Edit the program name.
1
Press the [▲] or [▼] key to select [Edit Name], and press the [OK] key.
Program 01
Edit Name
2
Enter a program name using the numeric keys and press the [OK] key.
Character Entry Method (page 10-4)
3
Press the [▲] or [▼] key to select [Yes] in the confirmation screen, and press the [OK] key.
Display the screen.
1
Press the [Program] key.
2
Press the [▲] or [▼] key to select a program number to delete, and press the [OK] key.
Select program
Program 01
1
1
1
5-27
Registering
2
2
2