Load Paper - Kyocera TASKalfa 1800 Operation Manual

Preparation before Use > Loading Paper
3
4
Adjust the cassette size.
1
Holding the paper width adjusting tab, move the paper width guides to fit the paper.
Paper sizes are marked on the cassette.
IMPORTANT
Make sure that the width guides are flush against the paper. If there is space
between the guides and the paper, set the width guides again.
2
Squeeze the ends of the bottom of the paper length guide and move the guide to fit the
length of the paper.
Paper sizes are marked on the cassette.
IMPORTANT
Make sure that the length guide is flush against the paper. If there is space
between the guide and the paper, set the length guide again.

Load paper.

1
Set the paper strait from the upper part.
3-8