Kyocera TASKalfa 1800 Operation Manual page 181

Troubleshooting > Troubleshooting
Message Display
Replace all originals and
press Start key.
Replace MK.
Restricted by Job
Accounting. (Print)
Restricted by Job
Accounting. (Scan)
S
Message Display
Scanner memory is full.
Set another cassette.
Shake the toner container.
T
Message Display
Toner is low.
(Replace when empty.)
U
Message Display
Unknown toner installed.PC
Checkpoints
―
―
―
―
Checkpoints
―
Have you selected Offset?
―
Checkpoints
―
Checkpoints
Does the installed toner container's
regional specification match the
machine's?
Corrective Actions
Remove originals from the document
processor, put them back in their original
order, and place them again. Press the
[OK] key to resume printing. Press the
[Stop] key to cancel the job.
Replacement of the parts in the
maintenance kit is necessary at every
150,000 pages of printing and requires
professional servicing. Contact your
Service Representative.
This job is canceled because it is
restricted by job accounting. Press the
[OK] key.
This job is canceled because it is
restricted by job accounting. Press the
[OK] key.
Corrective Actions
Scanning cannot be performed any
more due to insufficient memory of
scanner. Press the [OK] key to cancel
the job.
To use offsetting, the same size of paper
as the selected paper source must be
loaded in a different orientation in a
different paper source.
Open the front cover of the machine and
pull out the toner container. Shake the
toner container well and reinstall it.
Corrective Actions
It is almost time to replace the toner
container. Obtain a new toner container.
Corrective Actions
Install the specified toner container.
9-14
Reference
Page
―
―
―
―
Reference
Page
―
page 5-19
page 9-3
Reference
Page
―
Reference
Page
page 9-3