Connecting Modules And Devices - Bosch AMAX panel 2100 Quick Installation Manual

10 en | Connecting Modules and Devices
4

Connecting Modules and Devices

The AMAX panel provides Bosch option bus 1 and option bus 2 (only for AMAX 3000 BE and
AMAX 4000) to connect modules and devices. Each module can be connected to each bus.
A maximum of 14 modules (8 keypads) can be connected to each bus.
The following overview displays the maximum number of modules that can be connected.
Module
Keypads
DX2010
DX3010
DX4010
B426
B450 + B442 GPRS + DX4020G
RF receiver
Table 4.1: Maximum number of modules
How to connect a keypad and a RADION receiver
1. Connect the keypad to the option bus on the AMAX panel according to the wiring diagram
(refer to System overview, page 7).
2. Connect the RFRC-OPT RADION receiver to the option bus on the AMAX panel according
to the wiring diagram (refer to System overview, page 7).
3. Connect the red and black wires supplied with the battery to the AMAX panel and the
battery.
4. Connect the power adapter to the mains.
2016.05 | 06 | F.01U.309.297
All manuals and user guides at all-guides.com
AMAX 2100
4
-
1
1
2 or 1 if B450 with B442 or B443 / DX4020G is used
1
-
Quick Installation Guide
AMAX 3000 / AMAX 4000
3000 BE
8 16
3 6
2 DX3010
- DX4010
1
Bosch Sicherheitssysteme GmbH
AMAX panel