REMOVAL
Remove (for the Scénic):
– the windscreen wiper arms using tool Elé. 1294-01,
– the scuttle panel,
DIESEL EQUIPMENT
Injector rail
Injector rail
SPECIAL TOOLING REQUIRED
Mot. 1294 -01
Tool for removing windscreen
wiper arms
Mot. 1383
Tool for removing high pressure
pipes
ESSENTIAL SPECIAL TOOLING
"Low torque" torque wrench
TIGHTENING TORQUES (in daN.m)
High pressure pipe nut
Injection rail mounting bolt
IMPORTANT: before any intervention, connect the
after-sales diagnostic tool, query the injection
computer and check that the injection rail is not under
pressure.
Take note of the fuel temperature.
11020R
13-27
2.5±0.2
2.2±0.2
– the bulkhead panel.
Disconnect the flow meter and remove the air unit.
13
11036R2