WITH AIR
CONDITIONING
Using Mot. 1387 check that you are well within
tolerance (zone B).
NOTE:
Min. tolerance = Mark (4)
Max. tolerance = Mark (5)
VALUES AND SETTINGS
Checking the accessories belt tension
Checking the accessories belt tension
12205R3
Checking the centreline allows you to check if the
automatic tension system is working correctly.
If the centreline is outside permitted tolerance values,
check the following points:
ENGINE
CENTRELINE
Centreline less
than minimum
Centreline
greater than
maximum
07-4
F9Q
– Check that the eccentric plate
is positioned correctly (at the
base of the opening).
– Incorrect belt (too short).
– Incorrect belt passage.
– Check that the eccentric plate
is positioned correctly (at the
base of the opening).
– Incorrect belt (too long).
– Incorrect belt passage.
07