TIGHTENING TORQUES (in daN.m)
Manifold mounting stud
Manifold mounting stud
EGR valve mounting bolt
REMOVAL
NOTE: Removal of the manifolds requires that you
remove the turbocharger (see section 12
"Turbocharging"). The two manifolds cannot be
removed separately.
Disconnect:
– the battery,
– the air inlet pipe from the intake manifold (2),
– the pipe leading to the pressure sensor on the
manifold (1),
– the EGR (5) solenoid valve.
FUEL MIXTURE
FUEL MIXTURE
Manifolds
Manifolds
Remove (for the Scénic):
– the windscreen wiper arms,
– the scuttle panel,
0.8
– the bulkhead panel,
2.8
– the air unit,
– the turbocharger.
2.1
16869R2
12-9
12
12415R1