Radiator - Renault 2000 Megane Technical Note

F9q 732 engine
Hide thumbs Also See for 2000 Megane:
Table of Contents

Advertisement

REMOVAL
Put the vehicle on a two post lift.
Disconnect the battery.
Remove the engine undertray.
Drain the cooling circuit through the lower radiator
hose.
Disconnect the wiring of the fan unit.
Unclip the power steering reservoir and remove it.
Remove:
– the upper cross member,
– the upper radiator mountings,
– the upper hoses on the radiator,
– the inlet manifold-air exchanger duct,
– the fan unit mountings on the radiator and remove
the fan,
– the radiator mountings on the condenser and remove
the radiator.
COOLING SYSTEM

Radiator

Radiator
SPECIAL TOOLING REQUIRED
Mot. 1202 -01
Hose clip pliers
Mot. 1202 -02
Mot. 1448
Long nose pliers for hose clips
REFITTING
Refitting is the reverse of removal.
Fill and bleed the cooling circuit (see section 19
"Filling and bleeding").
NOTE: ensure that the fins of the radiator or of the
condenser (if fitted) are not damaged when
removing-refitting, and protect them if necessary.
19-4
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

MeganeScenic

Table of Contents