ENGINE AND PERIPHERALS
Sump
REFITTING
Put a drop of RHODORSEAL 5661 at (A) (on either
side of bearing N˚ 1), and at (B) (at the intersection of
the crankshaft closure panel and the cylinder block).
Refit the sump with a new gasket, pre-tightening it to a
torque of 0.8 daN.m, then tighten it finally to a torque
of 1.5 daN.m in the order recommended below.
Fill the engine with oil.
10-10
16246R
15195R
10