DIESEL EQUIPMENT
Heater plugs
Heater plugs
The resistance of a heater plug is 0.6 Ω.
TIGHTENING TORQUES (in daN.m)
Heater plug
Plugs may be removed without having to open the
high pressure circuit.
REMOVAL
Unclip the plug connector.
Clean the plug exterior to avoid any dirt entering the
cylinder.
Undo and then remove the plugs.
To undo the plug on cylinder 4 use a 10 mm long radio
socket attached to a universal joint. Once the plug is
loosened use a pipe socket to unscrew it completely.
REFITTING
Proceed in the reverse order to removal.
13-18
1.5
15762S
13