Rj-45 Module Connectors; Power Supply Cable Specifications - Cisco Nexus 7710 Site Preparation And Hardware Installation Manual

RJ-45 Module Connectors

RJ-45 Module Connectors
The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Supervisor modules
• Fabric Extenders (Cisco Nexus 2232PP, 2232TM, 2232TM-E, 2248PQ, 2248TP, and 2248TP-E FEXs)
Caution To comply with GR-1089 intrabuilding, lightning immunity requirements, you must use a foil twisted-pair
(FTP) cable that is properly grounded at both ends.
The following figure shows the RJ-45 connector.
Figure 39: RJ-45 Connector
1

Power Supply Cable Specifications

Note
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
176
• CONSOLE port
• MGMT ETH port
• 100/1000 downlink ports
Cisco Nexus C2348UPQ FEX
• 1000/10000 downlink ports
Cisco Nexus C2348TQ-10GE FEX
• 100/1000/10000 downlink ports
Pin 1 2 Pin 2
Switch Specifications
OL-30452-01.