Right Handlebar Controls - Victory Motorcycles 2009 Hammer Owner's Manual

INSTRUMENTS, FEATURES AND CONTROLS

Right Handlebar Controls

Engine Stop/Run Switch (1)
The engine stop/run switch completes or interrupts the ignition,
starter, and fuel pump circuits. To complete the circuits, allowing
the engine to start and run, press the lower portion of the engine
stop/run switch (RUN position). To interrupt the circuits, press the
upper portion of the switch (STOP position). The engine should
not start or run when the switch is in the STOP position.
Use the engine stop/run switch to turn the engine off under either
normal or emergency conditions.
Starter Button (2)
The starter button works only when the engine stop/run switch is
in the RUN position and the transmission is in neutral or the
clutch is disengaged (lever pulled in toward handlebar.) To engage
the engine starter motor, press the right side of the starter button.
For complete engine starting procedures, see Starting the Engine, page 65.
42
1
2
1. Engine Stop/Run Switch
2. Starter Button