Road Test; Universal Tool - Victory Motorcycles 2009 Hammer Owner's Manual

Fasteners
Visually inspect the entire motorcycle chassis and engine for loose, damaged, or missing fasteners. Tighten loose
fasteners to the proper torque (see the Specifications section of the Owner's Manual, or the VICTORY Service
Manual). Replace stripped, damaged, or broken fasteners with genuine VICTORY fasteners of equal size and
strength immediately.

Road Test

Before returning the motorcycle to regular use, road test it in a safe environment. Pay special attention to the proper
fit and operation of all serviced components. Make any corrections or additional adjustments as necessary to ensure
safe and enjoyable vehicle performance.
WARNING
Improperly installed or adjusted components can make the motorcycle unstable or hard to handle.
Improperly installed electrical components can cause engine or electrical system failure. In either case,
damage or serious injury could result.

Universal Tool

The universal tool is located in a holder under the left side cover. The universal tool is a combination 6mm
hexagonal wrench with a Phillips screwdriver tip, and can be used to service the following items:
Oil Drain Plug
Indicator Bulbs
Air Filter Headlight Bulb
Turn Signal Bulb
MAINTENANCE
Misc. Accessory Fasteners
135