Changing Wheel Position And Modifying For Left-Hand Use - FUTABA 1M23N20718 Instruction Manual

Changing wheel position and modifying for left-hand use

Changing the wheel position
The wheel position can be offset by using the
accessory APA wheel position offset adapter.
(See page 24 for the modification method.)
Angle can be adjusted
The operating angle of the wheel can be adjusted.
The operating angle of the wheel can be changed from 34 deg to 32 deg by installing
placement procedure.
Removing the steering wheel unit
screwdriver.
1
Hold the wheel and remove the
screw.
2
Pull off the wheel and wheel
adapter.
Since the wheel adapter is 34 deg
as standard, install the 32 deg
wheel adapter at final installation.
3
Remove the 3 steering wheel unit
mounting screws.
Steering wheel mounting screw
Wheel adapter
Wheel
Unit mounting screws
Modifying for left-hand use
The wheel section left and right installa-
tion direction can be reversed.
(See page 26 for the modification method.)
(p.116).
-
23