FUTABA 1M23N20718 Instruction Manual page 111

Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
System function setup
1
(Setting the battery type)
Select the setting item "BATT-TYP" by (JOG) button up or down
operation, and select the mode by pressing the (+) or (-) button.
"NiMH5 LiFe2" :Futaba rechargeable type battery
"DRY 4CELL" :Dry cell battery (alkaline battery recommended) 4 batteries
(Setting the liquid crystal backlighting mode)
Select the setting item "LCD-BLHT" by (JOG) button up or down
operation, and select the mode by pressing the (+) or (-) button.
"KEY-ON" :Fixed time backlighting ON after button operated.
"ALWAYS" :Backlighting always ON
"OFF" :Backlighting OFF
(Setting liquid crystal backlighting time)
Select the setting item "LHT-TIME" by (JOG) button up or down
operation, and use the (+) and (-) buttons to set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes effective.
(Jog button LED mode)
Select the setting item "JOG-BLHT" by (JOG) button up or down
operation, and use the (+) and (-) buttons to set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes effective.
"LCD-BLHT" :Link to LCD screen backlight setting
"OFF" :Jog button LED OFF
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
System Functions "SYSTM"
Setup items
button BATT-TYP
LCD-MODE :Backlighting mode
LHT-TIME
JOG-BLHT :Jog button LED mode
CONTRAST :Contrast
BUZ-TONE :Buzzer tone
LED-MODE :LED color
DISP-SEL
2ND-COND :2nd condition function
OPE-TIME
2.4G-BND
:Battery type
:Backlighting time
:Initial screen mode
:Power off forgotten alarm
:2.4GHz band mode
BATT-TYP
LCD-BLHT
MENU 1
LHT-TIME
JOG-BLHT
CONTRAST
BUZ-TONE
MENU 2
LED-MODE
DISP-SEL
2ND-COND
MENU 3
OPE-TIME
2.4G-BND
Setting item selection
The items move in the order
shown in the figure above.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Battery Type (BATT-TYP)
NIMH 5CELL, DRY 4CELL
Backlight mode (LCD-BLHT)
KEY-ON, ALWAYS, OFF
Backlighting time (LHT-TIME)
1~30
Initial value: 10
Jog button LED mode (JOG-BLHT)
LCD-BLHT, OFF
111