Data Transfer "Dttrn - FUTABA 1M23N20718 Instruction Manual

Data Transfer "DTTRN"

This function copies the T4PKS model memory data to another T4PKS. Connect the
communication port of both T4PKS with the optional DSC cord. Use with this function
with the T4PKS power switch at the display side.
Data is not interchangeable with T4PK.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Using the Data Transfer function
(Preparation)
- Connect the communication port of both T4PKS with the op-
tional DSC cord.
1
Set the power switch of both T4PKS to the display (DISP
ON) side.
Use the (JOG) button and (+) button to display the "DT-TRN"
at both T4PKS.
114
Cover
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t he button
Communication port (interior
left side)
DSC cord for T4PKS (option)
Connect the communication
port of both T4PKS with the
optional DSC cord.
button
* blinks at the current setup item.
* b l i n k s a t t h e c u r r e n t
setup item.
Data Transfer "DTTRN"
button
Data transfer side
Data receive side
When the "DT-TRN" menu
is selected when the trans-
mitter power switch is at
the transmit (PWR ON)
side, the message shown
below prompting you to set
the switch to the display
side is displayed.