Start Function, Engine Cut "Start - FUTABA 1M23N20718 Instruction Manual

Start Function, Engine Cut "START"

When the throttle trigger is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly. When
the Start function is activated, merely operating the throttle trigger slowly causes the
throttle servo to automatically switch from the set throttle position to a preset point so
that the tires do not lose their grip and the car accelerates smoothly.
Without Start function
Start Function Operation
- When the throttle trigger is moved to the preset position (trigger position: TG.P), the
throttle servo moves to the preset position.
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the first throttle trigger operation at starting. This
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically deac-
tivated and the set returns to normal throttle trigger operation.
Engine Cut Function
When the switch is pressed, the throttle servo will move to the preset position without
regard to the throttle trigger position. This is convenient when used to cut the engine of
boats, etc. (The function select switch function. See page 88)
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
66
With Start function
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
If the power switch is turned on while
Press t
he button
the preset (engine cut) switch is on, an
audible alarm will be heard. Immedi-
ately set the preset switch to OFF.
Start Function, Engine Cut "START"
Tires grip the track firmly- Car accelerates
Wheels spin- Car does not accelerate
button
* b l i n k s a t t h e c u r r e n t
setup item.
(Throttle system)
Function selection
First, select the function at
the "MODE" item.
"AT&SW" :Start function
"SW" :Engine Cut function
Warning display