How To Install The Outdoor Unit; Installing The Outdoor Unit; Fig - Sanyo SPW-X483GH56 Installation Instruction

4. HOW TO INSTALL THE OUTDOOR UNIT

4-1. Transporting
When transporting the unit, have it delivered as close
to the installation site as possible without unpacking.
Remove one of the two bolts (M8) fixing the suspen-
sion plate, and screw the Eye-Bolt (field supply) at the
position indicated. In the same way, attach the Eye-
Bolts in the 4 positions. (Fig. 4-1)
Put the rope or strap through the hook of the Eye-Bolt.

(Fig. 4-1)

Lift the unit with its weight balanced and evenly sup-
ported. (Fig. 4-1)
To prevent damage, use protective material (such as
cloth or cardboard) at all points where the lifting rope
or strap touches the unit. (Fig. 4-1)

4-2. Installing the Outdoor Unit

(1) Install a block or a solid platform under the
outdoor unit which provides a minimum height of
5 cm from ground level. (Fig. 4-2)
(2) The outdoor unit must be bolted down tightly to
the blocks or platform with 4 anchor bolts.
(Fig. 4-3)
Fix the outdoor unit firmly so it will not fall during strong
wind gusts.
0 0 0 0 0
C
- - - - -
RC
= = = = =
WT
 ! ' 0 1 7
  ! " * 1 2 9 :   : ; 1
   ! "  * + 1 2 3
Rope or strap
S uspension plate
56
S4179544
Protective cloth
or cardboad
Eye-Bolt and
suspension plate
Rope or strap
Eye-Bolt (field supply)
Bolt (M8)
Fig. 4-1
0108_C_I
Min. 5 cm
0109_C_I
Fig. 4-2
925
925
883
0188_C_I
Fig. 4-3