2-Way Air Discharge Semi-Concealed Type (S Type); Before Installing The Ceiling Panel - Sanyo SPW-X483GH56 Installation Instruction

2-Way Air Discharge Semi-Concealed Type
(S Type)
10-3.

Before Installing the Ceiling Panel

(1) Adjust the distance between the unit and the
surface of the ceiling (60 mm) using the 2 hex-
agonal nuts as shown in Fig. 10-2 while following
the installation gauge.
(2) Remove the air-intake panel and the air filter from
the ceiling panel as shown in Figs. 10-3 and 10-4.
Never touch or attempt to
move the air-direction louver
CAUTION
by hand or you may damage
the unit. Instead, use the
remote controller if you want
to change the direction of air
flow.
How to remove the air-intake panel (from either
side). (Fig.10-4)
1 Push in. 2 Slide.
4 Remove.
4
Air-intake panel
Fig. 10-4
3 Pull.
2
1
3
0809_S_I
79 79
Indoor unit
Ceiling
Fig. 10-2
Ceiling panel
Fig. 10-3
S4179544 S4179544
1 1 1 1 1
AS
2 2 2 2 2
0143_S_I
S
3 3 3 3 3
Air-intake panel
X
Air filter
0810_S_I
0 0 0 0 0
C