Transmission Lever; Multifunction Switch - Can-Am DS70 Operator's Manual

CONTROLS/INSTRUMENTS/EQUIPMENT
DS 90 X Only
vmo2008-020-014_a
REAR BRAKE LEVER
Step 1: Squeeze brake lever and maintain
Step 2: Push lever lock
All Models
To release mechanism: Squeeze
brake lever. Lever lock should auto-
matically return to its original position.
Brake lever should return to rest po-
sition. Always release parking brake
before riding.

6) Transmission Lever

A 3-position lever.
CAUTION Always
ly stop the vehicle and apply the
brakes prior to moving the trans-
mission lever.
______________________
60
TRANSMISSION LEVER PATTERN
1. Transmission lever
2. Forward (F)
3. Neutral (N)
4. Reverse (R)
To change the transmission position,
completely stop vehicle, apply brakes
then move lever to the desired position
while moving lever forward or back-
ward. Do not force lever.
complete-
F: Forward
It is the normal driving range. It al-
lows the vehicle to reach its maximum
speed.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment or towing.
R: Reverse
This allows the vehicle to go backward.

7) Multifunction Switch

The controls located on this multifunc-
tion switch are:
vmo2008-008-018_a
WARNING
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.