Rear Brake Lever; Parking Brake; Controls/Instruments/Equipment (Cont'd) - Can-Am DS70 Operator's Manual

vmo2008-020-005_a
TYPICAL
1. Brake lever
2. To apply brake

4) Rear Brake Lever

When compressed, the brake is ap-
plied. When released, it should auto-
matically return to its original position.
Braking effect is proportional to the
force applied on the lever and to the
type and condition of the terrain.
vmo2008-020-006_a
TYPICAL
1. Brake lever
2. To apply brake

5) Parking Brake

When applied, it prevents the vehi-
cle from moving. Useful during trans-
portation or when the vehicle is not in
operation.
CONTROLS/INSTRUMENTS/EQUIPMENT
Always use the parking brake
when the vehicle is not in opera-
tion.
Make sure parking brake is fully
disengaged before operating the
vehicle. When you ride the vehi-
cle, brakes that are caused to drag
by a continuous pressure on the
lever may cause damage to the
brake system and cause loss of
braking capacity and/or fire.
To engage mechanism: Squeeze
brake lever and maintain while moving
lever lock. Brake lever is now com-
pressed and applying brake(s).
DS 70/DS 90
vmo2008-008-008_b
TYPICAL — REAR BRAKE LEVER
Step 1: Squeeze brake lever and maintain
Step 2: Move lever lock
_____________________
WARNING
WARNING
59