Handheld Transmitter - JTS US-802D Pro Instruction Manual

5-2 Handheld Transmitter //

Mh-900 / Mh-910 / Mh-800 / Mh-700
(1) Turning the transmitter on/off
The on/off switch is located on the bottom of the microphone.
(2) Inserting and changing the battery
1. Loosen the microphone head counter-clockwise. (Figure 1)
2. Hold on to both battery tray buttons to release it. (Figure 2)
3. Insert 2 pieces of UM-3 1. 5 V batteries, remember to match
correct polarity. (step1 of Figure3)
4. Directly push the battery tray back. (step2 of Figure3)
5. Aim the connectors exactly for screwing on the microphone
head clockwise. (Figure 4)
Mh-8000 / Mh-8000i / Mh-D8 / Mh-860
(1) Loosen the battery cover and put the two
1.5V batteries into the battery tray.
(2) After putting into the battery, switch on
the power on/off on the bottom side of
microphone. (Figure 5)
Figure 1
Fig
Fig
Figure 4
ON
Figure 5
ure 2
1
2
ure 3
Mh-8000(i)
Mh-D8
Mh-860
18