Table of Contents
Advertisement
FIGURE 5-31
2. While pushing on the release levers, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. Reconnect the CMA into the back of the rail assembly:
Note – Refer to the Sun Fire T2000 Server Installation Guide for detailed CMA
installation instructions.
a. Insert the inner latch (smaller, right side) into the clip located at the end of the
mounting bracket (
5-44
Sun Fire T2000 Server Service Manual • July 2007
Release Levers
FIGURE 5-32
).
Advertisement
Table of Contents
