Table of Contents
Advertisement
5.2.13
Removing the Fan Power Board
1. Perform the procedures described in
Replacement" on page
2. Remove all three fans.
See
Section 4.2.1, "Removing a Fan" on page
3. Remove the screw that secures the fan power board to the chassis (
4. Slide the fan power board to the right to disengage it from the front I/O board.
5. Remove the fan power board from the front fan bay and place the board on an
antistatic mat.
FIGURE 5-22
5.2.14
Replacing the Fan Power Board
1. Unpackage the replacement fan power board and place it on an antistatic mat.
5-34
Sun Fire T2000 Server Service Manual • July 2007
5-1.
Removing the Fan Power Board
Section 5.1, "Common Procedures for Parts
4-2)
).
FIGURE 5-22
Advertisement
Table of Contents
