Table of Contents
Advertisement
3.3.4
Running the showfru Command
The showfru command displays information about the FRUs in the server. Use this
command to see information about an individual FRU, or for all the FRUs.
Note – By default, the output of the showfru command for all FRUs is very long.
●
At the sc> prompt, enter the showfru command.
In the following example, the showfru command is used to get information about
the motherboard (MB).
sc> showfru MB.SEEPROM
SEGMENT: SD
/ManR
/ManR/UNIX_Timestamp32:
/ManR/Description:
/ManR/Manufacture Location:
/ManR/Sun Part No:
/ManR/Sun Serial No:
/ManR/Vendor:
/ManR/Initial HW Dash Level: 06
/ManR/Initial HW Rev Level:
/ManR/Shortname:
/SpecPartNo:
SEGMENT: FL
/Configured_LevelR
/Configured_LevelR/UNIX_Timestamp32:
/Configured_LevelR/Sun_Part_No:
/Configured_LevelR/Configured_Serial_No: N4001A
/Configured_LevelR/HW_Dash_Level:
.
.
.
WED OCT 12 18:24:28 2005
ASSY,Sun-Fire-T2000,CPU Board
Sriracha,Chonburi,Thailand
5016843
NC00OD
Celestica
02
T2000_MB
885-0483-04
WED OCT 12 18:24:28 2005
5410827
03
Chapter 3 Server Diagnostics
3-25
Advertisement
Table of Contents
