Table of Contents
Advertisement
TABLE 2-1
Feature
PCI interfaces
Power
Remote
management
Firmware
Cryptography
* PCI-Express and PCI-X specifications described in this table list the physical requirements for PCI cards. Ad-
ditional support capabilities (such as device drivers) must also be provided for a PCI card to function in the
server. Refer to the specifications and documentation for a given PCI card to determine if the required drivers
are provided that enable the card to function in this server.
2.1.3
Remote Manageability With ALOM CMT
The Sun Advanced Lights Out Manager (ALOM) CMT feature is a system controller
(SC) that enables you to remotely manage and administer the server.
The ALOM CMT software is preinstalled as firmware, and it initializes as soon as
you apply power to the system. You can customize ALOM CMT to work with your
particular installation.
ALOM CMT enables you to monitor and control your server over a network, or by
using a dedicated serial port for connection to a terminal or terminal server. ALOM
CMT provides a command-line interface for remotely administering geographically
Server Features (Continued)
Description
3 PCI-Express (PCI-E) slots that support
specifications:
• Low-profile
• x1, x4, and x8 width
• 12v and 3.3v as defined by the PCI-Express specification
2 PCI-X slots that support
• 64-bit, 133 MHz
• Low-profile
• 3.3v (5v is also supplied, as defined by the PCI-X specification,
using a 3.3V form factor connector)
2 hot-swappable and redundant power supply units (PSUs)
Sun Fire T2000
Refer to the
and environmental specifications.
ALOM CMT management controller with a serial and 10/100 Mb
Ethernet port
System firmware comprising:
• OpenBoot™ PROM for system settings and power-on self-test
(POST) support
• ALOM CMT for remote management administration
Hardware-assisted cyptographic acceleration
*
cards with the following
*
cards with the following specifications:
Server Site Planning Guide for power
Chapter 2 Server Overview
2-5
Advertisement
Table of Contents
