Appendix C – Wall Mount the XN120 System Phone
The XN120 System Phone can be wall mounted using the built in wall mount/desk stand bracket on the base of
the phone.
There is a handset hook supplied; attached to the base of the phone.
Two screws (and wall fixing plugs where necessary) will be required to fix the bracket to the wall.
The XN120 system phone cannot be wall mounted when either the 64-button or 24-button console is attached.
1
Disconnect the line cord from
the wall socket.
2
Remove the wall mount/desk
stand bracket from the case of
the phone
3
Remove the handset hook
from the base of the phone
4
Insert the handset hook into
the slot below the hook switch
on the front of the phone.
The hook will hold the handset
in place when the phone is
wall mounted.
XN120 Getting Started Guide
Appendix C – Wall Mounting the XN120 System Phone
Press
Pull
Pull
t
Handset
hook
Insert
71