NEC XN120 Getting Started Manual page 68

Appendix A – 64 Button Consoles
Door phones
When the call button of the door phone unit is pressed the phones assigned will ring, refer to the separate
2PGDU guide 991420-5 for details. Lift the handset to answer to door phone all at the telephone associated
with the console.
When the door phone is in use the DOOR button on the console will go red.
Answering a Door Phone Call
Ringing
Extension
Night Modes
The night mode (NT) fixed feature key on the console will flip the XN120 between Day1 and Night1 mode each
time the key is pressed.
If you want to have access to other night modes (Rest1, Mid-Night1 etc) you will need to set one of the
programmable function keys on the telephone, refer to Function Keys in the Administrators User Guide within
this guide.
Message Waiting
The message waiting (MW) fixed feature key on the console can be used to either set a message waiting or
answer a message waiting.
Set
Answer
Signal/Voice Call
The signal/voice call (SG/VC) fixed feature key on the console can be used to change the voice/ring mode
when calling another XN120 system phone.
Transfer
The transfer (TRFR) fixed feature key on the console can be used to transfer the held call.
68
(Ringing) SPK
MW Key
Hear Intercom
Busy Tone or
No Answer
MW Key
Your phone's
Indicator is
flashing in Red
XN120 Getting Started Guide