NEC XN120 Getting Started Manual page 34

Configure the XN120
Configuration Sheet: Outgoing Exchange Line Access
With defaults shown.
Give each telephone a TAM number.
Prg 15-06-01
Telephone 1
200
201
202
203
204
205
206
207
There are 51 TAM numbers available.
Give each exchange line the access properties for the TAM number.
Prg 14-07-01
TAM Trunk 1
Number
1
7
2
0
3
0
4
0
5
0
Although there are 51 TAM numbers available only 5 are listed as this is normally sufficient.
34
TAM Number for each day/night mode
Default=TAM1 for all modes
2 3 4 5
Trunk 2 Trunk 3
7 7
0 0
0 0
0 0
0 0
6 7 8
Values available:
0 – No access
1 – Outgoing only
2 – Incoming only
3 – Retrieve held call only
4 – Outgoing and retrieve held call
5 – Incoming and retrieve held call
6 – Incoming and outgoing
7 – Incoming, outgoing and retrieve held call
XN120 Getting Started Guide