7- Connecting The Xn120 To An External Paging System - NEC XN120 Getting Started Manual

Connect the External Paging Amplifier

7- Connecting the XN120 to an External Paging System.

The external paging system is connected to the RJ11 socket labelled MOH/PAGE located under the sub cover
to the right of the ST1-ST8 sockets.
An RJ11 cable is supplied with the system.
The external paging system is not supplied with the XN120.
The connections of the RJ11 plug supplied with the XN120:
XN120
Description
MOH/PAGE
socket
2 black
External
Paging output
5 yellow
! The connections are not polarity sensitive.
18
Specification
Impedance: 600 Ohm @1KHz
Nominal output level: 250mV (-10dBm)
Maximum output level: 400mV RMS
XN120 Getting Started Guide