Table of Contents
Advertisement
4.6 COMMUNICATION
4
If the update is to a model option with higher functionality (see OPTION 1, OPTION 2 and OPTION R in the model list), the
program will request a password. This password can be obtained placing an order with GE Multilin. The following three
parameters must be clearly indicated in the order:
•
Serial number of the unit.
•
Current model option (before memory update).
•
Desired model option (after memory update).
In a case where more than one unit needs to be updated, all the serial numbers must be detailed, and a different password
will be assigned for each unit.
4-22
Figure 4–28: UPDATE FLASH DIFFERENCES
MIFII Digital Feeder Relay
4 COMMUNICATIONS
GEK-106237P
Advertisement
Table of Contents
