Get Info From Relay; Send Info To Relay; Print Setup; Print Preview - GE MIFII GEK-106237P Instruction Manual

4 COMMUNICATIONS 4.2 FILE

4.2.5 GET INFO FROM RELAY

The File – Get info from relay option enables the user to save the relay settings in a file on the hard disk of the computer.
This file can later be opened offline to review and modify settings, and send them again to the relay after the modifications.

4.2.6 SEND INFO TO RELAY

The File – Send info to relay option enables to send to the relay a settings file stored on the hard disk of the computer.
Please, note that only files matching the version of the relay's firmware will be acceptable for being sent to the relay. In
other case, an error message will be shown, asking the user to convert the file using the Setting File Converter application
included in this software.

4.2.7 PRINT SETUP

The File – Print Setup option enables the user to configure the print setup for the settings file as shown in Figure 4–5:
4
Figure 4–5: PRINTER SETUP

4.2.8 PRINT PREVIEW

The File – Print Preview option displays a preview of the settings print-out. It is also provides a quick view of all the relay
settings at a glance, without having to navigate through the different menu trees. From this screen it is also possible to
configure the printer that will be used, or to directly print the document. Double clicking on the document with the left mouse
button will enlarge the document view, and double clicking with the right button will reduce the size.
GEK-106237P MIFII Digital Feeder Relay 4-5