Fixed Length Selection - Newland NLS-HR200 User Manual

Symbologies
Interleaved 2 of 5

Fixed Length Selection

Program the engine to read fixed length or fixed length area Interleaved 2 of 5. Command
programming use 3 decimal digits to define length value. The fixed length value MUST be 2 to 64
even value (32 even values).
When enabled, Interleaved 2 of 5 Selection prevail "Message Length Selection"
** Disable Fixed Length Selection
【Pro CMD：0405140】
Select Code Length
【Pro CMD：0405160】
The engine only read Interleaved 2 of 5 which are 12 and 24 bytes.
1.
2.
3.
4.
5.
The engine only read Interleaved 2 of 5 between 12 bytes and 24 bytes.
1.
2.
3.
Undo fixed length selections between 2 bytes and 64 bytes.
1.
2.
3.
nlscan.com
"Code Programming ON", then "Select Code Length"
Digit Code "0"，"1"，"2"
"Save Programming"
Digit Code "0"，"2"，"4"
"Save Programming", then "Code Programming OFF"
"Code Programming ON", then "Select Code Length"
Digit Code "0"，"1"，"2"，then read "0"，"2"，"4"
"Save Programming", then "Code Programming OFF"
"Code Programming ON", then "Undo Code Length Selection"
Digit Code "0"，"0"，"2", then read "0"，"6"，"4"
"Save Programming", then "Code Programming OFF"
Enable Fixed Length Selection
【Pro CMD：0405150】
Undo Code Length Selection
【Pro CMD：0405170】
Tools
Code Programming ON
Code Programming OFF
Page 62