Table of Contents
Advertisement
Set reading length
The scanner can be configured to read only those whose length is between (including) the minimum and maximum length Code 128 Barcode.
[Minimum length (default: 1 )】
The maximum length limit value of any one-dimensional barcode shall not exceed 127 , If the maximum length is less than the minimum length, it will only read the bars of these two lengths
code. If the maximum length is equal to the minimum length, only this length is supported.
Limit the scanner to only read the smallest 8 Bytes, max 12 Byte Code128 Barcode:
1.
2.
3.
4.
5.
6.
7.
8.
9.
67
read " Startup settings "
read " Minimum length " code
Read data code "8" (See appendix-data code)
read " save " Code (see appendix-save or cancel)
read " The maximum length " code
Read data code "1"
Read data code "2"
read " save " code
read " Exit settings "
Startup settings
[Maximum length (default: 127 )】
Exit settings
Advertisement
Table of Contents
