Gestetner B003 Service Manual page 77

[A]
8. Install two trays [A] (! x1 each).
9. Connect the finisher cable [B] to the main machine below the right rear handle.
10. Turn on the main switch and check the finisher operation.
NOTE: When moving the finisher to a new location, if you wish to put the finisher
back in the original carton, change the DIP switch settings. See DIP
Switches in the finisher service manual.
SM
TWO-TRAY FINISHER INSTALLATION
B352I103.WMF
[B]
1-39
B352I106.WMF
B003/B004/B006/B007