Gestetner B003 Service Manual page 562

PRINTER INSTALLATION
22. Do not connect the parallel cable at this point. Turn the machine on and check
the setting of the following copier SP mode:
• SP5-907: Plug & Play Name - select the correct one.
23. Print out the configuration page to check if the printer controller is installed
properly.
(Configuration page: User Tools/ Printer Settings/ List Test Print/ Config. Page)
24. If the parallel cable is going to be connected, first turn off the machine. After
connecting the cable, turn the machine back on.
B003/B004/B006/B007 1-6 SM