Gestetner B003 Service Manual page 685

BIT SWITCHES
Relationship between available paper sizes and printer width used in the
setup protocol
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
No paper available (Paper end)
Printer Switch 02
No FUNCTION
0 1st paper feed station usage for
fax printing
0: Enabled
1: Disabled
1 2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
2 3rd paper feed station usage
for fax printing
0: Enabled
1: Disabled
3 4th paper feed station usage
for fax printing
0: Enabled
1: Disabled
4 LCT usage for fax printing
0: Enabled
1: Disabled
5-7 Not used
Printer Switch 03
No FUNCTION
0 Length reduction of received
data
0: Disabled
1: Enabled
1-3 Not used
B003/B004/B006/B007
Printer width used in the Protocol (NSF/DIS)
297 mm width
256 mm width
216 mm width
216 mm width
COMMENTS
0: The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be used
for printing fax messages and reports.
Note: Do not disable usage for a paper feed station
which has been specified by User Parameter Switch
0F (15), or which is used for the Specified Cassette
Selection feature.
Do not change the settings.
COMMENTS
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
Do not change the settings
3-28
SP No. 1-103-003
SP No. 1-103-004
SM