Table of Contents
Advertisement
BIT SWITCHES
Scanner Switch 09
No
FUNCTION
0
Independent dot erase level
to
(monotone background special
2
original 1 mode)
3-7
Not used
Scanner Switch 0A
No
FUNCTION
0
Independent dot erase level
to
(colored background special
2
original 2 mode)
3-7
Not used
Scanner Switch 0B
No
FUNCTION
0-3
Scan margin setting (right and left margin in book scan ADF mode)
The setting can be between 0 and F (H) (unit 0.5 mm).
Default setting: 2 mm
4-7
Scan margin setting (top and bottom margin in book scan and ADF mode)
The setting can be between 0 and 7 (H) (unit 0.5 mm).
Default setting: 3 mm
B003/B004/B006/B007
COMMENTS
The value can be between 0 (Off) and 7.
For a higher threshold, input a higher value (larger
dots are erased).
Default setting: 6
This setting is independent from the threshold
setting specified by the copier SP modes.
Do not change the settings.
COMMENTS
The value can be between 0 (Off) and 7.
For a higher threshold, input a higher value (larger
dots are erased).
Default setting: 1
This setting is independent from the threshold
setting specified by the copier SP modes.
Do not change the settings.
COMMENTS
3-24
SP No. 1-102-010
SP No. 1-102-011
SP No. 1-102-012
SM
Advertisement
Table of Contents
Troubleshooting
