Gestetner B003 Service Manual page 664

SP5-XXX (Initializing)
5
Mode No.
101 Initialize SRAM
000
102 Erase All Files
000
103 Reset Bit Switches
000
104 Factory setting
000
105 Delete All Speed Dials
001 Speed Dials Enabled
002 Speed Dials Disabled
SP6-XXX (Reports)
6
Mode No.
101 System Parameter List
000
102 Service Monitor Report
000
103 G3 Protocol Dump List
001 G3 All
Communications
002 G3-1 (All
Communications)
003 G3-1 (1
Communication)
004 G3-2 (All
Communications)
005 G3-2 (1
Communication)
006 G3-3 (All
Communications)
007 G3-3 (1
Communication)
SM
SERVICE PROGRAM MODE
Function
Initializes the bit switches and user
parameters, user data in the SRAM, files in
the SAF memory, and clock.
Erases all files stored in the SAF memory.
Resets the bit switches and user
parameters.
Resets the bit switches and user
parameters, user data in the SRAM and
files in the SAF memory.
200 speed dials and 1000 quick dials are
available when the Fax Function Upgrade
Unit is installed.
1200 quick dials (but no speed dials) are
available when the Fax Function Upgrade
Unit is installed.
Function
Touch the "ON" button to print the system
parameter list.
Touch the "ON" button to print the service
monitor report.
Prints the protocol dump list of all
communications for all G3 lines.
Prints the protocol dump list of all
communications for the G3-1 line.
Prints the protocol dump list of the last
communication for the G3-1 line.
Prints the protocol dump list of all
communications for the G3-2 line.
Prints the protocol dump list of the last
communication for the G3-2 line.
Prints the protocol dump list of all
communications for the G3-3 line.
Prints the protocol dump list of the last
communication for the G3-3 line.
3-7 B003/B004/B006/B007