Polycom RMX 2000 Hardware Manual page 34

Hide thumbs Also See for RMX 2000:

Table of Contents

Chapter 1- Hardware Description

1-28

On the

CNTL

Module to be installed, move the ejector lever to the

fully open position.

Slide in the replacement

CNTL

Push the

properly seated in its slot.

Ensure that the metal ejector levers are fully retracted into their

housings.

Tighten the captive screws on the front panel of the RMX 2000 that

secure the Functional

10 Turn ON the RMX 2000.

For more information on the Card Configuration Modes after reset, see "MPM

and MPM+ Configuration Modes" on page 1-19.

CNTL

Module.

Module firmly into the Backplane, making sure it is

CNTL

Module.

Table of Contents